Walkin On 11th Jul and 12th Jul
Company Satyam-Venture Engineering Services Pvt. Ltd.
Qualification Any Graduate
Experience 4 to 9 yrs
Work Location Hyderabad / Secunderabad
Job Description
This drive is to fill multiple positions in Design/CAD.
We urge all associates to refer their friends & acquaintances, who are likely to fit the bill (requirements are outlined further below)
OPEN POSITIONS ARE DETAILED BELOW:
CAD/ DESIGN
1. Steering systems
Location: Hyderabad
Experience: 5+ years
Experience in Column Drive, I Shaft, Hydraulic Power Steering Systems, DFMEA Engineer, Costing.
2. Specilaist - Costing (Machining)
Experience in Design & Development or Supplier development with in-depth understanding of Machining processes.
Experience in Supplier Developments / Costing of Product is must.
Preferred knowledge in Costing softwares like aPriori, PCS, DFM/DFA etc.,
Education qualification: Bachelor Degree
Experience: 5 to 8 yrs
Location: Hyderabad
3. Specilaist Costing (Casting)
Experience in Design & Development or Supplier development with in-depth understanding of Casting processes.
Experience in Supplier Developments / Costing of Product is must.
Preferred knowledge in Costing softwares like aPriori, PCS, DFM/DFA etc.,
Education qualification: Bachelor Degree
Experience: 5 to 8 yrs
Location: Hyderabad
4. Specilaist - Costing (Plastic Molding)
Experience in Design & Development or Supplier development with in-depth understanding of Plastic Molding processes.
Experience in Supplier Developments / Costing of Product is must.
Preferred knowledge in Costing softwares like aPriori, PCS, DFM/DFA etc.,
Education qualification: Bachelor Degree
Experience: 5 to 8 yrs
Location: Hyderabad
5.Casting SME
Casting Product Design & Development.
Complete understanding High pressure Die Casting (HPDC) processes and design consideration of HPDC product
Experience in Casting part optimisation for weight, manufacturability, Stifness requirement.
Experience in Gear Box Castings, Steering Housing Casting
Education qualification: Bachelor Degree
Experience:8 to 10 yrs
Location: Hyderabad
6. Forging SME
Forging Product Design & Development.
Complete understanding Closed Die Forging processes and design consideration of forged product
Experience in Forged part optimisation for weight, manufacturability, Stifness requirement.
Experience in Gear Box shaft, Steering parts forging is added advantage
Education qualification: Bachelor Degree
Experience: 8 to 10 yrs
Location: Hyderabad
7.BIW Structures
VA/VE and Cost reduction Engineer for Body Exteriors (BIW Structures, Closures & Exterior Trim)
- Hands on Experience in automotive industry with design and development knowledge of automotive parts
- Should have very strong skills in Value Engineering (VA/VE) and Cost reduction project skills for the Body Exterior
- Should have very good knowledge in Benchamarking activities (Especially in the Body Exteriors like Structures, Closures and Exterior Trims)
- Should have good knowledge in manufacturing processes like injection moulding, stamping, die-casting etc
- Should have good knowledge of tool design & GD&T
- CAD skills in Catia V5 is an added advantage
Education qualification: Bachelor Degree
Experience:8 to 10 yrs
Location: Hyderabad (UK - Onsite)
8.Product Engineer with Steering Wheel Domine
*Catia V5 *Responsible for design and developing new Steering Wheel Assembly.
1. Engineering Design:
Design the Airbag and Steering wheel with OEM CAD data, such as Class A data.
Development of Die casting, sheet metal & Plastic parts.
Responsible for Engineering change release
Creation of new design proposal for new enquiry
2. Project Leadership:
Leading the projects, from Concept to SOP. Managing and executing the projects. 3. Benchmarking Airbag and Steering wheel
4. Value Analysis and Value Engineering (VAVE) Airbag and
Steering wheel 5. Testing:- Airbag and Steering wheel.
Education qualification: B.Tech / PGTD / NTTF graduate
Experience: 5 to 10 yrs
Location: China
9. UG Interiors/Exteriors
Essential:
Minimum 3 years of Product Design & development experience in automotive Interior Trim Components (Door Trim, IP, Glove Box, Console, Load Floor, Pillar Trims, and Soft Trims etc.)
Working experience in Component & System level designing.
Expertise in UG NX modelling and Team Center.
Good Knowledge in Manufacturing & Assembly feasibility study.
Work experience with International Automotive Tier 1 and OEMS.
Good presentation and communication skills.
Key Responsibilities:
Designing and modelling of Interior Plastic -Hard & Soft Trim Components using UG-NX.
Design review with CTC (Chrysler Technical Centre, USA).
Manufacturing and assembly feasibility studies.
Benchmarking study as and when required.
Design Support for the analysis teams (Impact, Durability and NVH) to meet various Regulatory and test requirements.
Desirable:
Core, In-depth knowledge of Plastic Tool Design.
Good knowledge on manufacturing process (Thermoforming, Blow Molding, Compression molding etc. & Plastic Materials.)
Education qualification: Bachelor Degree
Experience: 4 to 8 yrs.
Location: Hyderabad
CAE/ SIMULATION
1. Crash & Safety CAE
Location: Hyderabad
Experience: 8-15 Years
JOB PROFILE:
Conducting full vehicle crash, Pedestrian safety & occupant simulations independently using LS Dyna; providing countermeasures for achieving performance targets and improving overall design.
Providing technical analysis of crash CAE results for achieving vehicle performance targets;
Extending support in preparation of detailed technical reports/presentations to customer.
Training and mentoring the team of young and budding engineers, providing technical and project guidance to them for optimizing operational efficiencies.
Ensuring compliance of projects with regulation requirements of new and emerging markets.
Reporting to senior leadership on progress & issues at each critical project milestone and to customer for design & performance gateway approvals.
SKILL SET:
Should be able to perform full vehicle crash simulations (Frontal, Side, Rear, PedPro,
Occupant etc.,)
Tool Knowledge in one of ANSA/ HyperMesh & Primer.
Good level of proficiency in LS Dyna/ PAMCRASH, should possess commendable post processing skills.
Should be able to provide design countermeasures, correlation experience.
Knowledge of Japanese would be an added advantage.
2. Sr. Modeler Safety
Location: Chennai
Experience: 3-5 Years
Able to perform de-penetration & do connection for full vehicle model in Safety (Radioss/ LS-Dyna, Hypermesh, Hypercrash)
Able to handle contacts, load types and boundary conditions for various safety regulations. (Radioss/ LS-Dyna, Hypermesh, Hypercrash)
Able to perform integrity check in Radioss/ LS-Dyna.
Able to run & debug the model for results.
3. Modelers Interiors
Location: Chennai
Experience: 2-3 Years
Job Description
Exposure in Automotive interior parts
Shoud be able to to perform mid-plan meshing for all interior plastic parts
Should be able to execute hexa meshing for interior simple parts like Headliner,foam
Should be able to perform quality check for different profiles such as ls-dyna,abaqus,nastran and moldflow
Shoud have the basic knowledge in CAE
Having Skills in assembly/connection of trims would be an added advantage
Qualification
Education Qualification : BE/Diploma [Mech./ Automobile/Prod] Engineering
Number of Years of Experience : 2+ Years
Professional Exposure : Hands on experience in ANSA and HM for plastic meshing
4. Body NVH Sign off
Location: Chennai
Experience: 3-5 Years
Should have good knowledge in Trim body connections,
Should have experience in HM and ANSA, Should able to run Modal analysis in Nastran
5. Seating systems Crash / Durability CAE
Location: Hyderabad /Chennai
Experience: 4-10 Years
Crash analysis in seating domain preferably hands on Abaqus otherwise Ls-dyna
Durability analysis of seating systems hands on ABAQUS tool
Tool Knowledge in one of ANSA/ HyperMesh
6. Driveline Transient NVH CAE Multi Body Dynamics
Location: Chennai
Experience: 5-10 Years
Lead upfront CAE Pre-PS assessment to drive PS Driveline architectural design decision by PS
Lead CAE assessment of Driveline Transient NVH
Lead CAE analysis to resolve Driveline Transient NVH issues if required
Work closely with Driveline and Torsional CAT teams to deliver and comply with their technical requirements and Health Chart assessment metrics
Interface with Driveline NVH development team as well as Vehicle NVH to ensure programs are fully supported and delivered to their target requirements
Analysis experience (both linear and non-linear) to evaluate Driveline with emphasis in transient simulation using Multi-Body Dynamics methods (with ADAMS 2+ year experience preferred)
Knowledge of Drivetrain Transient NVH error states
7. Commercial Vehicles Crash & Safety CAE
Location: Pune
Experience: 3-6 Years
Should have experience in Crash analysis of full vehicle and systems as per AIS, ECER and FMVSS norms
Working knowledge in Front Pendulum Impact, Roof crush, Rear panel strength, Seatbelt anchorage test, FUPD/ RUPD/ SUPD analysis
Meshing - Hypermesh & Solver - LS Dyna
8. Body NVH CAE
Location: Chennai
Experience: 3-6 Years
Position Description:
Should be able to handle project on his own
Should be able to do modifications
Should be able to do NVH Health Chart Analysis
Should be able to do Torsion/DSK/VTF/NTF improvement Iterations
Should be able to discuss with client for their requirements and perform analysis
9. Durability CAE Body /Chassis & Suspension Systems
Location: Chennai
Experience: 3-8 Years
3+ years of experience in Durability analysis of Body /Chassis/ Suspension.
Good experience in handling sub-system level analysis using Nastran & Abaqus.
Experience in NVH related analysis on suspension including body will be an added advantage.
10. NVH/Durability Model-Build
Location: Chennai
Experience: 3-5 Years
Sheet metal, Plastic meshing & boundary meshing
Depenetration & Assembly
Experience in Integration of Subassembly & connection (in HM & ANSA latest version)
Basic Integrity check (Nastran)
Knowledge of full vehicle system
11. Braking Systems CAE
Location: Hyderabad
Experience: 4-12 Years
Key Responsibilities & Tasks in Braking domain:
Carry out NVH (Squeal) & Static analyses in ABAQUS on braking domain
Provide design recommendations/Suggestions to customer based on analysis results.
Test data analysis, Optimization and interpretation of results
Interaction with customer team.
Product knowledge of Braking system (Especially Disc brakes).
Experience Details:
Essential:
4 to 12 Years of experience in Braking system analysis, Product and design.
Understanding of Braking system product and practical aspects of it.
Experience on FE tools - ABAQUS, HyperMesh.
Desirable:
Hands on working experience in MS Excel and Powerpoint.
Knowledge of other analyses tools such as ANSYS & NASTRAN in Braking domain.
Please note that no policy exists in Satyam-Venture to reimburse potential candidates for their travel to walk-in venues.
Please do send copies of recently updated resumes to the following:
CAD/ Design: vasudha_katta@satven.com or rajesh_skp@satven.com
CAE/Simulation: krishnamohan_yalavrt@satven.com or praveen.mupkala@satven.com
Resumes sent to other than designated team (mentioned above) will not be eligible for referral amount.
In case of any clarifications, feel free to contact Rajesh SKP / Vasudha @2252.
Address
Time: Between 10 AM and 5.00 PM.
Venue: Citrine # 211, S.C. Road, Seshadripuram Bangalore - 560 020. Karnataka, India.
Thanks for your feed back we will soon reply you EmoticonEmoticon